Loading Bottom Rack - Kenmore 665.1605 Use & Care Manual

2. With theother h and, pull o utthetopoftheadjuster. •
3. Raise o rlower t herack tooneofthepreset positions.
4. Release theadjuster.
5. Repeat thesteps fortheremaining adjusters. •
NOTE: The toprack must b elevel. •
Flexible tines (on some models)
The row of tines on the left-hand and right-hand sides of the top
rack can be adjusted to make room for a variety of dishes.
Do not load glasses, cups, or lightweight plastic items in the
bottom rack. Load small items in the bottom rack only if they
are secured in place.
Load plates, soup bowls, etc., between tines.
Overlap the edges of plates for large loads.
Load soup, cereal, and serving bowls in the rack in a variety
of ways depending upon their size and shape. Load bowls
securely between the rows of tines. Do not nest bowls
because the spray will not reach all surfaces.
To adjust the flexible tines
1. Grasp the tip of the tine that is in the tine holder.
2. Gently push the tine out of the holder.
3. Lay the tines down, toward the center of the rack,
No-flip clips (on some models)
The no-flip clips hold lightweight plastic items such as cups, lids,
or bowls in place during washing.
To move a clip
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
The bottom rack is designed for plates, pans, casseroles, and
utensils. Many items, up to 13" (33 cm) tall, fit in the bottom rack.
(See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
12place setting
• Load cookie sheets, cake pans, and other large items at the
sides and back. Loading such items in front can keep the
water spray from reaching the detergent dispenser.
• Secure heavily soiled cookware face down in the rack.
• Make sure pot handles and other items do not stop rotation
of the spray arm(s). The spray arm(s) must move freely.
• Do not load items between the bottom rack and the side of
the dishwasher tub because they might block the water inlet
opening.
TURBOZONE
TM
wash area
The TURBOZONE
TM
wash area is located at the back of the lower
dishrack.
NOTE: You must select the TURBOZONE
TM
wash option to utilize
this wash feature. Do not face items toward the rear of the unit if
you are not using this wash option.
TURBOZONE
TM
wash area
Load pans, casserole dishes, etc. in the back of the lower
dishrack with the soiled surfaces facing the TURBOZONE
TM
spray jets. Make sure items do not interfere with the water
feed tube or top spray arm.
Tip items toward the rear of the unit between the back two
rows of tines to maximize coverage.
10 place setting
10