Removing A Cd/Dvd Drive - Dell Dimension 1100 Service Manual

NOTICE: Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").
8. Reattach the front panel (see
9. Replace the computer cover (see
NOTICE:
To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the
computer.
10. Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
11. Enter system setup (see
12. Verify that your computer works correctly by running the Dell Diagnostics.
CD/DVD Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in
the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.
1. Follow the procedures in
2. Remove the computer cover (see
3. Release and remove the front panel (see

Removing a CD/DVD Drive

1. Disconnect the power, audio, and CD/DVD drive cables from the back of the drive and from the system board.
page 48).
Replacing the Computer
Entering System Setup) and update the appropriate Diskette Drive option.
Before You Begin.
Removing the Computer
page 46).
Cover).
Cover).