GE JGP628 Installation Instructions Manual page 4

Installation Instructions
The following MINIMUM clearance
dimensions must be maintained.
6" MIN.
clearance from
/cutout to side
wa]l on the right
of the unit
,18" MIN.
height from
countertop to
nearest cabinet on
either side of unit
13" MAX, Depth
of unprotected _
overhead cabinets
3O" MIN,
clearance from
J
countertop to
unprotected
overhead surface .
clearance from _
cutout to side
wall on the left
of the unit I _ _11 •
Overall cooktop dimensions
36" _'_" 21"
_ 3"
Cutout dimensions
of the countertop
i o insure accuracy, it is best to make Ill
a template when cutting the opening
F;
in the counter.
19 1/8" width of cut
2
Between cutout
and the wall behind
the cooktop
2 1/2"Min.
from front edge
of cutout
and front edge
of countertop
OP NING
The recommended Gas Supply
Location from the backwall.
Recommended
gas supply
location.
l"Min. From Backwall
c)
/_ From Cutout
J
Center Line
Make sure the wall coverings,
countertop and cabinets around the
cooktop can withstand heat (up to
200°F) generated by cooktop.
Wall covering,
cabinets and
countertop
must withstand
heat u_
4