Recording From An External Source; Setting A Disc To Protect - Magnavox MWR10D6 Owner's Manual

Settings for an external source (cont'd)

Recording from an external source

DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW
Before recording from an external source, see the instructions for the
connection on page 34.
1. Turn the TV and this unit on, and be sure to select the input of the
TV to which the unit is connected.
Refer to the table on page 13.
2. Press [OPEN/CLOSE A] to open the disc tray. Place the disc to
record properly.
3. Press [OPEN/CLOSE A] to close the disc tray.
This operation may take a while to be recognized.
4. Select the input of the unit which the external equipment is
connected. (E2 or E1)
• To use the input jacks on the back of this unit, select "E1 (Rear)"
position by pressing [0], [0], [1] with the Number buttons on the remote
control.
• To use the input jacks on the front of this unit, select "E2 (Front)"
position by pressing [0], [0], [2] with the Number buttons on the remote
control.
5. Select a recording mode by pressing [REC
MODE].
Refer to "Recording mode" on page 24.
6. Press [RECORD I] on the unit to start
recording.
7. Press "Play" on the external source to record from.
8. Press [STOP C] on the unit to stop recording.
This operation may take a while to be completed.
DVD+RW DVD+RW DVD+R DVD+R
To prevent accidental recording,
editing or erasing the titles, you
can protect them from the Setting
menu.
1
Press [SETUP].
2
Using [K / L], select "Disc Edit".
Press [OK].
Disc menu will appear.
3
Using [K / L], select "Disc
Protect OFF ON". Press [OK].
Recording
+VR +VR
DVD-R DVD-R

Setting a disc to protect

+VR +VR
DVD-RW DVD-RW DVD-R DVD-R
Confirmation window will appear.
Disc Protect OFF
Yes
No
4
Using [K / L], select "Yes".
Press [OK].
A disc will be protected.
This operation may take
a while to be completed.
HQ SPP
SP
(1Hr)
(2Hr) (2.5Hr)
SLP EP LP
(6Hr) (4Hr) (3Hr)
ON
1
4
2 3 6 8
2
3
4
Note
To cancel the disc protect:
• When you insert a disc
protected with this unit,
"Disc Protect ON OFF" will
appear instead of "OFF
Disc Protect ON OFF
Yes
No
To release the protect for the
disc, select "Disc Protect
ON OFF" at step 3, then
select "Yes".
EN
2
3
5
1
1
ON".
35