Basic Recording - Magnavox MWR10D6 Owner's Manual

DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW
Follow the steps below to record
TV programs.
1
Press [STANDBY-ON
Turn the TV on and be sure to
select the input to which the unit is
connected.
2
Press [OPEN/CLOSE A].
The disc tray will open.
3
Insert your disc with its label
facing up. Align the disc to the
disc tray guide.
4
Press [OPEN/CLOSE A] to
close the disc tray.
• When inserting a brand-new
DVD+RW/DVD-RW disc, the
unit automatically starts to
format.
• If titles have been recorded on the
disc, the title list is displayed. Press
[STOP C] to exit the title list.
This operation may take a
while to be completed.
5
Using [REC MODE], select a
recording mode.
Refer to "Recording mode" on
page 24.
HQ (1Hr)
6
- +
Using [CHANNEL /
the Number buttons, select a
desired channel to record.
Recording

Basic recording

+VR
+VR
DVD-R DVD-R
7
Press [REC I] to start record-
ing.
"I" mark will be displayed for 5
].
seconds.
I
Press [PAUSE F] to pause
recording. Press [PAUSE F]
or [REC I] again to restart
recording.
8
Press [STOP C] to stop record-
ing.
The recorded title will be on the
displayed title list. (Refer to "Guide
to a title list" on page 51.)
Writing to Disc
disc tray
guide
• Press [STOP C] to exit the title list.
0:58
] or
CH 12
90%
1 SP (2Hr)
NOV/21/06 11:00AM CH12 SP
NOV/21/06 0:20:44
2
ENPTY TITLE
1:41:17 SP (2Hr)
1
6
8
7
Note
• Recording starts immediately
and continues until the disc is
full or you stop recording.
• When the unit clock has not
been set, the space for a date
and time of title names will be
blank.
• When you record a TV
program which has Stereo
and SAP audio, you have to
select the TV channel audio
(Stereo or SAP) beforehand.
Only the selected channel
audio will be recorded. Refer
to "Selecting the TV stereo
or SAP" on page 20 for more
details.
• You cannot change the
recording mode during the
REC pause mode.
• You can change a channel
during the REC pause mode.
EN
2
4
7
5
6
27