Dell Vostro 3300 Service Manual page 8

EIST
Execute Disable Bit
Intel® Virtualization
Technology
Power Management
USB Wake Support
Wake On LAN
Post Behaviour
Adapter Warnings
Fast Boot
Keyboard Click
Wireless
Internal Bluetooth
Internal WLAN
Internal WWAN
Security
The Security tab displays the security status and allows you to manage the security features of the computer.
Security
Service Tag
Asset Tag
Unlock Setup Status
Admin Password Status
Admin Password
System Password Status
System Password
Password on Boot
Password Bypass
Password Change
Computrace
HDD Password Configuration
Boot
The Boot tab allows you to change the boot sequence.
Exit
This section allows you to save, discard, and load default settings before exiting from System Setup.
Back to Contents Page
Allows the clock speed of the processor to be
dynamically changed by software while minimizing
power draw and heat dissipation.
Allows increased protection against buffer overflow
attacks.
Allows a platform to run multiple operating systems
and applications in independent partitions, allowing
one computer to function as multiple virtual
computers.
Allows USB devices to wake-up the computer from
standby. This feature is enabled only when the
AC adapter is connected.
Allows the computer to be remotely turned on. This
feature is enabled only when the AC adapter is
connected.
Enables or disables adapter warnings.
Allows the System Setup to skip certain tests
during power on self test (POST) which decreases
the amount of time needed to boot the computer.
Enable or disable the keyboard sound.
Enable or disable the Bluetooth module.
Enable or disable the wireless LAN module.
Enable or disable the wireless WAN module.
Displays the current service tag of the computer.
Displays the asset tag.
Specifies whether a setup password has been
assigned.
Specifies whether an admin password has been
assigned.
Allows you to set an admin password.
Specifies whether a system password has been
assigned.
Allows you to set a system password.
Enable or disable authentication every time your
computer boots.
Allows you to bypass the system and hard drive
passwords when your computer restarts.
However, you must enter the passwords if you are
turning the computer on from the shutdown state.
Enable or disable the password change feature.
Enable or disable the Computrace feature on your
computer.
Allows you to set a password on the computer's
internal hard drive (HDD). The hard drive password is
enabled even when the hard drive is installed on
another computer.
Default: Enabled
Default: Enabled
Default: Disabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Disabled
Default: Enabled
Default: Enabled
Default: Enabled