Reset To The Default Setting (Except For Parental Setting); Information; Troubleshooting Guide - Magnavox DP170MW8B Owner's Manual

Reset to the Default Setting (Except for PARENTAL Setting)

1
Press [SETUP] in the
stop mode.
STOP SETUP
SETUP menu
QUICK SETUP
PLAYER MENU ENGLISH
TV ASPECT 4:3 LETTER BOX
PROGRESSIVE OFF
HDMI MODE 480p
DOLBY DIGITAL BITSTREAM
OK

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this manual. Refer to the following:
Problem
No power.
This unit does not respond to
the remote control.
Poor picture or noise.
No picture.
No sound/image from HDMI
connection.
Distorted picture.
Disc cannot be played back.
No sound.
No DTS audio is output.
Audio or subtitle language
does not match the setting.
The camera angle cannot be
changed.
Audio or subtitle language
cannot be changed.
" " appears on the TV screen,
prohibiting an operation.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for details on
correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
2
Select "INITIALIZE".
or
QUICK SETUP
PLAYER MENU ENGLISH
TV ASPECT 4:3 LETTER BOX
PROGRESSIVE OFF
HDMI MODE 480p
DOLBY DIGITAL BITSTREAM
OK

INFORMATION

• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the infrared sensor window. If necessary, remove all the obstacles
between the sensor and the remote control.
• You have to be within 23 feet (7m) of this unit.
• Tune your radio to an empty AM station so that you hear a lot of static. Turn up the volume, then
if you hear some signal sound from the radio in response to your pressing buttons on the remote
control, the remote control is working.
• Press and hold any button on remote control toward a digital camera. The remote control is working
if you confirm infrared light through the digital camera.
• Interference signal may be received. Change the position and direction of the unit.
• Connect the video cable firmly.
• Insert a correct video disc that can be played back on this unit.
• Set "PROGRESSIVE" correctly in "DISPLAY" menu. Turn it on only if your TV has progressive scan and
you are using the component video connections between the unit and the TV. Disable progressive
scan for all other connections. Refer to pages 6-7.
• Check the HDMI connection. (Check the status of the HDMI related indications.)
• Check whether the connected monitor device or other device supports HDCP. (This unit will not
output a video signal unless the other device supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches the supported input format of
other connected device.
• If the unit is connected to the unauthorized display device with an HDMI cable, the audio/video signal
may not be output when playing back a commercial DVD-video.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction. Refer to page 11.
• Check if "PROGRESSIVE" is set correctly according to your TV. Refer to pages 18-20.
• Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
• Connect the audio cables firmly.
• Turn on the power of the audio component.
• Correct the audio output settings.
• Correct the input settings on the audio component.
• This unit does not support DTS audio.
-This is not a malfunction.
• The selected language is not available for audio or subtitles on the DVD.
-This is not a malfunction.
• The DVD does not contain sequences recorded from different camera angles.
-This is not a malfunction.
• The DVD does not contain audio source or subtitles in the selected language.
-This is not a malfunction.
• That operation is prohibited by this unit or the disc.
-This is not a malfunction.
3
Select "YES".
or
OK
INITIALIZE
Initialize?
NO
YES
OK
Corrective action
– 23 –
4
To exit the menu
SETUP
OK
Press
Note:
twice.
• When you do not wish
to initialize, select
"NO" at step 3.
EN