Remote Control; Installing The Batteries For The Remote Control - Magnavox DP170MW8B Owner's Manual

Remote Control

STANDBY-ON OPEN/CLOSE
1 2 3
4 5 6
7 8 9
CLEAR
0 +10
NEXT
PREV
PLAY
STOP PAUSE
RETURN TITLE
OK
DISC SETUP
MENU
A-B
ZOOM REPEAT REPEAT
AUDIO SUBTITLE ANGLE
MODE DISPLAY SEARCH
Installing the Batteries for
the Remote Control
Install the batteries (AAAx2) matching the
polarity indicated inside battery compart-
ment of the remote control.
1 2
Keep in mind the following when using the
remote control:
• Make sure that there are no obstacles
between the remote control and the infrared
sensor window on the unit.
• The maximum operable ranges from the
unit are as follows.
- Line of sight: approx. 23 feet (7m)
- Either side of center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
STANDBY-ON PREV PLAY NEXT STOP OPEN/CLOSE
Note:
• Do not mix alkaline and manganese
batteries.
• Do not mix old and new batteries.
• Always remove batteries from remote
control if they are dead or if the
remote control is not to be used for
an extended period of time. This will
prevent battery acid from leaking into
the battery compartment.
EN
Disc
Button
(Alphabetical order)
1 2 3
4 5 6
7 8 9
0 +10
OK
A-B
REPEAT
ANGLE
AUDIO
CLEAR
DISC
MENU
DISPLAY
3
MODE
OPEN/CLOSE
PAUSE
PLAY
PREV NEXT
REPEAT
RETURN
POWER PLAY HDMI
SEARCH
SETUP
STANDBY-ON
STOP
SUBTITLE
TITLE
ZOOM
• To select chapter or title directly.
• To move the cursor and determine
its position.
• To search forward/backward
through a disc.
• To begin slow forward/reverse
playback in the pause mode.
• To repeat between your chosen
point A and B.
• To select camera angles on a disc.
• To select audio languages on a disc. • To select "STEREO", "L-ch" or
• To clear the markers.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B repeat.
• To call up the menu on a disc.
• To display the current disc or HDMI
mode.
• To set black level on/off.
• To set virtual surround on/off.
• To open or close the disc tray.
• To turn the unit on.
• To pause disc playback.
• To advance playback one frame at a
time.
• To begin disc playback.
• To turn the unit on.
• To skip chapters.
• To play back a chapter or title
repeatedly.
• To return to the previous operation
in menu.
• To search chapter, title or time.
• To set or search the markers.
• To call up the setup menu.
• To turn the unit on or off.
• To stop playback.
• To select subtitles on a disc.
• To call up the top menu on a disc.
• To magnify part of a picture. (2x/4x) • To magnify part of a picture. (2x)
– 10 –
• To select track or file directly.
• To move the cursor and determine
its position.
• To search forward/backward
through a disc.
• To repeat between your chosen
point A and B. (CD)
• To rotate a picture of JPEG files.
(JPEG)
"R-ch". (CD)
• To clear the markers. (CD)
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B repeat.
(CD)
• To call up the file list. (JPEG)
• To display the current disc or HDMI
mode.
• To arrange the playing order or
play randomly.
• To set virtual surround on/off.
(CD)
• To activate the slide show mode.
(JPEG)
• To open or close the disc tray.
• To turn the unit on.
• To pause disc playback.
• To begin disc playback.
• To turn the unit on.
• To skip tracks or files.
• To play back a track or disc
repeatedly. (CD)
• To play back a file, folder or disc
repeatedly. (JPEG)
• To return to the previous operation
in menu.
• To search track.
• To search time. (CD)
• To set or search the markers.
(CD)
• To call up the setup menu.
• To turn the unit on or off.
• To stop playback.
• To return to the top file of the
highest hierarchy in the program
and file list. (JPEG)
(JPEG)