Display Bezel - Dell Inspiron 9400 Service Manual
Hide thumbs
Also See for Inspiron 9400:
- Owner's manual (188 pages) ,
- Owner's manual (186 pages) ,
- Service manual (57 pages)
Table of Contents
Advertisement
2. Align the display assembly over the screw holes in the base of the computer.
NOTE:
The left hinge assembly has a small tab that you must first insert underneath the edge of the palm rest.
1
tab
NOTE:
When you replace the four screws, ensure that you tighten them in the order indicated by the labels "1," "2," "3," and "4" on the display hinges.
3. Replace the four M2.5 x 5-mm screws.
4. Connect the display cable to the system board.
5. Reroute the display cable into the cable channel.
6. Replace the hinge cover (see
7. If a Mini-Card is installed, connect the antenna cables to the card (see Mini-Card). If one is not installed, tuck the antenna cables into their secured
location.
8. Replace the Mini-Card cover.
Display Bezel
Replacing the Hinge
Cover).
Hide quick links:
Advertisement
Table of Contents
