CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Align the screw holes on the fan with the holes on the base of the computer.
2. In sequential order, replace the four M2.5 x 5-mm screws to secure the fan to the base of the computer.
3. Connect the fan connector to the system board connector.
4. Replace the processor thermal-cooling assembly (see
5. Replace the graphics card assembly, if applicable (see
6. Replace the palm rest (see
7. Replace the internal card with Bluetooth wireless technology, if installed (see
8. Replace the display assembly (see
9. Replace the keyboard (see
10. Replace the hinge cover (see
11. Replace the hard drive (see
12. Replace the optical drive (see
Back to Contents Page
Replacing the Processor Thermal-Cooling
Replacing the Graphics Card
Replacing the Palm
Rest).
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Replacing a Hard
Drive).
Replacing the Optical
Drive).
Assembly).
Assembly).
Replacing the Bluetooth
Card).