Display Bezel; Removing The Display Bezel - Dell Vostro 1700 Service Manual

Hide thumbs Also See for Vostro 1700:
Table of Contents

Advertisement

 
11. Close the display and turn the computer over.
 
12. Replace the two M2.5 x 8-mm screws on the bottom of the computer.
 
13. Connect the Mini-Card antenna cables (see
 
14. Replace the Mini Card compartment cover and tighten the screws.
 Display Bezel
 

Removing the Display Bezel

 
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
 
1. Follow the instructions in
Before You
 
2. Remove the hinge cover (see
 
3. Remove the keyboard (see
 
4. Remove the display assembly (see
 
5. Remove the four rubber display bumpers and two mylar screw covers from around the display bezel.
 
6. Remove the six M2.5 x 4.2-mm shoulder screws from around the display bezel.
1 rubber display bumpers (4) 2 M2.5 x 4.2-mm screws (6)
3 mylar screw covers (2)

4 display bezel

NOTICE:
Removal of the bezel from the display back cover requires extreme care to avoid damage to the bezel.
 
7. Starting at the top corner of the display panel, use your fingers to separate the bezel from the top cover, then lift the inside edges to separate the
remainder of the bezel.
 
Wireless Mini
Cards).
Begin.
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing the Display
Assembly).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron 1720Inspiron 1721

Table of Contents