Installing The Dc-In Jack - Dell Precision M4600 Owner's Manual

Installing The DC-in Jack

1. Place the DC-in jack in the system.
2. Place the DC-in bracket in the system and tighten the single screw
securing it in place.
3. Connect the DC-in cable to the system board.
Input/Output board .
4. Install the
CPU heatsink .
5. Install the
palm rest .
6. Install the
CPU fan .
7. Install the
hard drive .
8. Install the
optical drive .
9. Install the
keyboard .
10. Install the
keyboard trim .
11. Install the
base cover .
12. Install the
battery .
13. Install the
14. Follow the procedures in
After Working Inside Your Computer .
73