Removing The Microprocessor Thermal-Cooling Assembly - Dell Inspiron 8500 Service Manual

Hide thumbs Also See for Inspiron 8500:
Table of Contents

Advertisement

Back to Contents Page
 
Microprocessor Thermal-Cooling Assembly
Dell™ Inspiron™ 8500/8600 Service Manual
 

Removing the Microprocessor Thermal-Cooling Assembly

 
CAUTION:
Before performing the following procedures, read the safety instructions in your Owner's Manual.
 
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
 
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
1.  Follow the instructions in
"Preparing to Work Inside the
2.  Remove the keyboard.
3.  Remove the fan.
4.  Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the microprocessor thermal-cooling assembly to the system
board.
 
 
1  captive screws (4)
2  microprocessor thermal-
cooling assembly
5.  Rotate the microprocessor thermal-cooling assembly up toward the side of the computer and away from the system board.
 
Computer."

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron 8600

Table of Contents