Getting Started; Installing Your Usb Adapter; Configuring Your Bluetooth Device - Creative Wireless Adapter CB3200 User Manual

GETTING STARTED

Installing Your USB Adapter

Before you install your Creative Wireless Adapter CB3200/CB3700, take note of the Bluetooth
Device Address (BDA) found on a label on your USB adapter. You need them later to verify
your Bluetooth installation and pair your Bluetooth devices.
DO NOT connect the USB adapter to your computer before installing the software. You will be
required to do so halfway through the installation.
1. Turn on your computer and insert the Installation CD into your CD-ROM/DVD-ROM drive.
Your CD should start automatically. If it does not, follow the steps below:
i. Double-click the My Computer icon.
Alternatively, click Start --> My Computer.
ii. Right-click the CD-ROM/DVD-ROM drive icon, and then click AutoPlay.
2. Follow the instructions on the screen to install the Bluetooth software.
3. When the Software Installation Wizard dialog box appears, click the Next button.
4. When the License Agreement dialog box appears, select I accept the terms in the
license agreement and click the Next button.
5. Follow the instructions on the screen.
6. When the Bluetooth device not found dialog box appears, click the Cancel button.
7. Click the Finish button.
8. When prompted, restart your computer.
9. Connect your USB adapter to your computer's USB port.
Note: Windows 98 and 98 SE users may be prompted by an Add New Hardware Wizard
dialog box when Windows detects your USB device. Follow the instructions on the screen.
You may need to insert the Windows Installation CD into the CD-ROM drive during
installation. Some computers may be supplied without the Windows CD, but have the
necessary files stored in c:\windows\options\cabs (replace c:\ with the drive letter your
Windows has been installed on).
The My Bluetooth Places icon
For Windows XP Service Pack 2 only
1. When the Found New Hardware Wizard dialog box appears, select No, not this time
and click the Next button.
2. Select Install from a list or specific location (Advanced) and click the Next button.
3. Select Don't search. I will choose the driver to install and click the Next button.
4. Select CB3200/CB3700 Creative Wireless Adapter and click the Next button.
5. Click the Finish button. Your USB adapter should appear under Bluetooth Devices in
Device Manager.
6. When the Driver Signature Notice dialog box appears, click the OK button.
Note: Your computer's USB port may be located on the front panel. If your USB adapter
does not fit into the USB port located on the back panel, connect it to the USB port
located on the front panel.

Configuring Your Bluetooth Device

1. On your taskbar, right-click the My Bluetooth Places icon
Bluetooth.
The Initial Bluetooth Configuration Wizard dialog box appears.
2. Follow the instructions on the screen to complete the configuration.
3. When you are prompted to install another Bluetooth device, click the Skip button.
4. Click the Finish button.
appears on your computer's desktop and system tray.
, and select Start Using
6