Download  Print this page


Heat Sink and Fan Assembly
Dell™ Latitude™ XT2 Service Manual
Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best
practices information, see the Regulatory Compliance Homepage at

Removing the Heat Sink and Fan Assembly

1. Follow the procedures in
Before Working Inside Your Tablet-P
2. Remove the
from the Tablet-PC.
3. Remove the
hard drive
from the Tablet-PC.
4. Remove the
memory and mini-card cover
5. Remove the
from the Tablet-PC.
6. Remove the
from the Tablet-PC.
7. Remove the
BIOS chip
from the Tablet-PC.
8. Remove the
Bluetooth module
9. Remove the
hinge cover
from the Tablet-PC.
10. Remove the
from the Tablet-PC.
11. Remove the
display assembly
12. Remove the
palm rest
from the Tablet-PC.
13. Remove the
system board
from the Tablet-PC.
14. Disconnect the fan cable from the system board connector, then flip over the system board.
15. Loosen the four captive screws on the heat sink.
from the Tablet-PC.
from the Tablet-PC.
from the Tablet-PC.


Comments to this Manuals

Symbols: 0
Latest comments:
  • A 1 Feb 13, 2018 11:48:
    I need help I don't know what I did to my latitude xt2 I'm getting a system or administra​tor password but I won't ley me access any data what c@n I do