Dell Latitude D600 Service Manual page 32

Display Assembly and Display Latch: Dell Latitude D600 Service Manual
1 display
2 cable-routing clips (4)
3 display cable connector
5. Pull up on the pull-tab that is attached to the display cable connector to remove the connector
from the system board.
6. Remove the three M2.5 x 6-mm screws.
7. Rotate the display assembly to a 90-degree angle, and lift the display assembly up and out of the
computer base.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/D600/D600_SERVICE_MANUAL/display.htm (3 of 9)6/21/2004 2:15:18 AM