Removing The System Board - Dell Latitude C500 Series Service Manual

Hide thumbs Also See for Latitude C500 Series:
Table of Contents

Advertisement

Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual

Removing the System Board

NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed
batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted
metal on the computer.
NOTICE:
Read
"Preparing to Work Inside the
procedure.
1. Remove the
hard
2. Remove the
keyboard
3. Remove the
display
4. Remove the
palmrest
5. Remove the
thermal cooling assembly.
6. Remove the microprocessor.
7. Verify that all PC Cards or plastic blanks are removed from the PC Card slot.
8. Verify that the PC Card ejectors do not extend from the PC Card slot.
9. Turn the computer over, and remove the six M2.5 x 5-mm screws labeled with a "circle B" that secure the system
board assembly to the bottom case assembly.
10. Remove the three M2.5 x 5-mm screws labeled with a "circle B" that secure the fan guard to the bottom case
assembly. The fan guard is located on the right of the bottom case assembly.
System Board Assembly
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...600/C500%20C600%20Service%20Manual/remove.htm (33 of 36)6/21/2004 1:22:14 AM
drive.
assembly.
assembly.
assembly.
Computer" before performing the following

Advertisement

Table of Contents
loading

This manual is also suitable for:

Latitude c600Latitude c600 series

Table of Contents