Removing The Microprocessor Thermal Cooling Assembly - Dell Latitude C500 Series Service Manual

Hide thumbs Also See for Latitude C500 Series:
Table of Contents

Advertisement

Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual

Removing the Microprocessor Thermal Cooling Assembly

NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed
batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface
on the computer.
NOTICE:
Read
"Preparing to Work Inside the
procedure.
1. Remove the
hard
2. Remove the
keyboard
3. Turn the computer over, lift the keyboard up, rotate it forward toward the front of the computer, and place it face
down on the palmrest.
4. Loosen the four captive screws securing the microprocessor thermal cooling assembly.
5. Remove the microprocessor thermal cooling assembly from the system board assembly.
NOTICE:
When reattaching the microprocessor thermal cooling assembly, tighten the captive screws in consecutive
order, from 1 to 4.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...600/C500%20C600%20Service%20Manual/remove.htm (25 of 36)6/21/2004 1:22:14 AM
drive.
screws.
Computer" before performing the following

Advertisement

Table of Contents
loading

This manual is also suitable for:

Latitude c600Latitude c600 series

Table of Contents