Removing The Keyboard Assembly - Dell Latitude C500 Series Service Manual

Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual
NOTE: If you are installing a wireless NIC, fold and tuck the unused interface cables into the slot so they do not
interfere with the cover.
NOTE: A modem-only mini-PCI card has one connector; place the unused NIC connector under the mini-PCI
card.
4. Replace the memory module cover.
Keyboard Assembly
Removing the Keyboard Screws

Removing the Keyboard Assembly

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed
batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface
on the computer.
NOTICE: Read "Preparing to Work Inside the
procedure.
1. Remove the hard
2. Turn the computer over, and remove the five M2.5 x 12-mm screws from the holes labeled "circle K."
3. Turn the computer over and open the display.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...600/C500%20C600%20Service%20Manual/remove.htm (8 of 36)6/21/2004 1:22:14 AM
drive.
Computer" before performing the following