Free Warning Label Replacement - Black & Decker LST220 Instruction Manual

AUTOMATIC LiNE FEED DOES NOT WORK
• Remove battery from toot.
• Remove the spool cap.
• Pull the cutting line until it protrudes approximately 5-3/8 inches
(136mm) from the spool. If insufficient cutting line is left on the
spool, install a new spool of cutting line.
• Ensure that the line is not crisscrossed on the spool as detailed
in figure 17. If it is, unwind the cutting line, then wind it back on
the spool neatly so that the lines do not cross.
• Push the spool onto the housing until it snaps securely into place.
• Align the tabs on the spool cap with the cut outs in the housing.
• If the cutting line protrudes beyond the trimming blade, cut it
off so that it just reaches the blade. If the automatic line feed
still does not work or the spool is jammed, try the following
suggestions:
• Carefully clean the spool and housing.
• Remove the spool and check if the lever in the spool housing
can move freely.
• Remove the spool and unwind the cutting line, then wind it on
neatly again. Replace the spool into the housing.
All Black & Decker Service Centers are staffed with trained
personnel to provide customers with efficient and reliable power
tool service. Whether you need technical advice, repair, or genuine
factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow
page directory under "Tools--Electric" or call: 1-800-544-6986 or
visit www.btackanddecker.com
The first is to return the product to the retailer from whom it was
purchased (provided that the store is a participating retailer).
Returns should be made within the time period of the retailer's
policy for exchanges (usually 30 to 90 days after the sale). Proof
of purchase may be required. Please check with the retailer for
their specific return policy regarding returns that are beyond the
time set for exchanges.
The second option is to take or send the product (prepaid) to a
Black & Decker owned or authorized Service Center for repair or
replacement at our option. Proof of purchase may be required.
Black & Decker owned and authorized Service Centers are
listed under "Tools-Electric" in the yellow pages of the phone
directory.
This warranty does not apply to accessories. This warranty
gives you specific legal rights and you may have other rights
which vary from state to state or province to province. Should
you have any questions, contact the manager of your nearest
Black & Decker Service Center. This product is not intended for
commercial use.
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
check country specific warranty information contained in
the packaging, call the local company or see the website for
warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1-800-544-6986 for a
free replacement.
Black & Decker (U.S.) Inc. warrants this product for two years
against any defects in material or workmanship. The defective
product will be replaced or repaired at no charge in either of two ways.
13
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
See 'Tools-Electric' [_
- Yellow Pages -
for Service & Sales