Table of Contents
Advertisement
L i f e B o o k A S e r i e s B I O S
Drive1 Submenu of the System Menu
The Drive1 submenu allows you to configure secondary ATA devices.
Info
Type:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 4: Fields, Options and Defaults for the Drive1 Submenu of the System Menu
Menu Field
Options
■
Type:
Auto
■
None
■
Transfer Mode:
Standard
■
Fast PIO 1
■
Fast PIO 2
■
Fast PIO 3
■
Fast PIO 4
■
Multiword DMA 1
■
Multiword DMA 2
■
Ultra DMA
Disabled
Mode:
■
Mode 0
■
Mode 1
■
Mode 2
■
Mode 3
■
Mode 4
■
Mode 5
8
Phoenix TrustedCore(tm) Setup Utility
System
Advanced
Drive1 [MATSHITADVD-RAM UJ-850S]
[Auto]
[Standard]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 4. Drive1 Submenu
Default
[Auto]
[Standard]
[Disabled]
Security
Boot
Exit
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values
Select
Sub-Menu
Description
NOTE: The Type field does not appear as a drop-down menu. Tap
the spacebar to toggle the selections.
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following setup items do not appear.
This option cannot be changed (automatically identified by the
BIOS).
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. Multi-word DMA is
automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3,
and set to mode 2 for Fast PIO 4 / DMA.
This option cannot be changed (automatically identified by the
BIOS).
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode.
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
Advertisement
Table of Contents
