Download Print this page

Advertisement

Disassembly Procedure

Please follow the information provided in this section to perform the
complete disassembly procedure of the notebook. Be sure to use
proper tools described before.
A
SUS A7T Series Notebook consists of various modules. This chapter describes the
procedures for the complete notebook disassembly. In addition, in between
procedures, the detailed disassembly procedure of individual modules will be
provided for your service needs.
The disassembly procedure consists of the following steps:
• Battery Module
• HDD Module
• Wireless LAN Module
• TV Tuner Module
• Second Memory Module
• CPU Module
• ODD Module
• Keyboard
• Main Memory Module
• Top Case Module
• LCD Module
• Bottom Case Module
• Motherboard Module
2 - 1
Disassembly procedure
2
Chapter

Advertisement

   Also See for Asus A7T

   Related Manuals for Asus A7T

   Summary of Contents for Asus A7T

  • Page 1: Disassembly Procedure

    Be sure to use proper tools described before. SUS A7T Series Notebook consists of various modules. This chapter describes the procedures for the complete notebook disassembly. In addition, in between procedures, the detailed disassembly procedure of individual modules will be provided for your service needs.

  • Page 2

    Disassembly procedure Battery Module B A T T E R Y The illustration below shows how to remove the battery module. Turn over the notebook. Unlock the battery lock (No.1). Slide the battery lock (No.2) and pull the battery pack out. 2 - 2...

  • Page 3

    Disassembly procedure HDD Module H D D M O D U L E The illustrations below show how to remove the HDD module from the notebook. Removing HDD Module H D D M O D U L E Remove 2 screws [M2 * 4(L)] here. And lift the cover away. R E M O V A L Pull out the hard drive and lift the hard drive away.

  • Page 4: Wireless Lan Module

    Disassembly procedure Wireless LAN Module W I R E L E S S The illustration below shows how to remove the Wireless LAN module. L A N Remove 2 screws [M2 * 4(L)] and remove the Mini-PCI Cover away. MINI-PCI TV TUNER Disconnect the main Antenna and open the two latches to pop the MINI PCI MODULE up then pull it out.

  • Page 5: Tv Tuner Module

    Second Memory Module M E M O R Y The A7T Series Notebook has two expansion SO-DIMM slots for you to upgrade the total M O D U L E memory up to 2GB with two DDR2-533 1024 MB SO-DIMM RAM modules, here introduce you the second memory slot.

  • Page 6: Cpu Module

    Disassembly procedure 2. Remove the Memory module by opening the latches which will pop the module up to a 45° angle and then pulling out the module. 3. If there is an existing memory, remove it by opening the latches(No. 2), which will pop the module up to a 45°...

  • Page 7

    Disassembly procedure Turn the non-removable screw 180 degrees counter-clockwise to loosen the CPU. Squeeze the vacuum handling pump and use it to lift the CPU away. Unlock Don’t touch the die above the CPU. Remove the CPU away. Remove CPU thermal pad from CPU die with a pair of tweezers. Remove 2 screws [M2 *3(L)] and disconnect the fan cable &...

  • Page 8

    Disassembly procedure ODD Module O D D M O D U L E The illustration below shows how to remove the ODD module. 1. Remove the rubber and remove 2 screws [M2 * 4(L)] from the bottom case. 2. Put the screw driver here and push the ODD drive out from the NB. 2 - 8...

  • Page 9

    Disassembly procedure Keyboard K E Y B O A R D D I The illustration below shows how to remove the keyboard S A S S E M B L Y Removing Keyboard K / B Push the 3 latches in with a pair of tweezers or a single-slotted R E M O V A L screwdriver and lift the keyboard up.

  • Page 10

    Main Memory Module M E M O R Y The A7T Series Notebook has two expansion SO-DIMM slots for you to upgrade the total memory up to 2GB with two DDR2-533 1024 MB SO-DIMM RAM modules, here M O D U L E introduce you the main memory slot.

  • Page 11

    Disassembly procedure Top Case Module T O P C A S E The illustrations below show how to disassemble and remove the top case module of the M O D U L E notebook. The module contains the top case itself and touch pad module. Removing Top Case Module T O P C A S E...

  • Page 12

    Disassembly procedure Inverter cable Coaxial cable Remove 2 screws [M2.5 * 8(L)] on rear side. Remove 2 screw [M2 * 6(L)] and carefully remove the hinge cover on the both side. Remove 2 screws [M2.5 * 8(L)] to unloosen the hinge. 2 - 12...

  • Page 13

    Disassembly procedure Remove 4 screws [M2.5 * 8(L)] on the Bottom case. Separate LCD Module from the Top case module. 2 - 13...

  • Page 14

    Disassembly procedure Remove 8 screws [M2 * 4(L)] on the top case. 10. Disconnect the speaker cable & Touch pad FPC & Audio FPC & Launch BD FPC from the motherboard. Launch BD Speaker cable Touchpad FPC Audio FPC 2 - 14...

  • Page 15

    Disassembly procedure 11. Turn over the NB and remove 1 screws [M2 * 8(L)] & 8 screws [M2 * 6(L)] on the bottom case. M2*8L M2*6L 12. Remove 3 screws [M2 * 3(L)] on the bottom case. 13. Remove 8 screws [M2 * 4(L)] on the bottom case. 2 - 15...

  • Page 16

    Disassembly procedure 14. Now you can separate the Top case from the Bottom case. Removing Touch Pad Module T O U C H P A D Remove 6 screws [M2 * 3(L)] and disconnect the Touch pad board FPC with M O D U L E tweezers then take away the Touch pad bracket from the top case.

  • Page 17

    Disassembly procedure Removing LAUNCH BD. module L A U N C H M O D U L E Remove 1 yellow mylar and disconnect the FPC. R E M O V E Remove 4 screws [M2 * 4(L)] and take away the Launch BD. module. Removing Audio board module A U D I O B O A R D...

  • Page 18

    Disassembly procedure Removing Speaker module S P E A K E R M O D U L E Remove 6 screws [M2 * 4(L)] on the both side. R E M O V E Remove 2 yellow mylar and take away the both speaker module. 2 - 18...

  • Page 19

    Disassembly procedure LCD Module L C D The illustrations below show how to remove and disassemble the LCD module. The M O D U L E module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front Please do not disassemble the individual parts. cover, and LCD back cover.

  • Page 20

    Disassembly procedure Remove 2 screws [M2.5 * 5(L)] and disconnect the coaxial cable & LCD cable then remove the inverter board. Remove 2 screws [M2.5 * 8(L)] and remove the LCD bottom bracket from the LCD cover. Remove 2 screws [M2 * 5(L)] and remove the LCD module from the LCD back covert.

  • Page 21

    Disassembly procedure Remove 4 screws [M2* 3(L)] & 4 screws on the other side. Remove 1 yellow tape and disconnect the coaxial cable from LCD. Remove 1 yellow tape and remove CCD module then disconnect the CCD cable. 2 - 21...

  • Page 22

    Disassembly procedure Remove 2 screws [M2.5 * 5(L)] and remove the Top LCD bracket from the LCD cover. 10. Remove 1 screw [M2.5 * 5(L)] & 2 screws [M2.5 * 8(L)] on the both side. 11. Remove the LCD Hinges from LCD back cover on both sides. M2.5* 5L M2.5* 5L M2.5* 8L...

  • Page 23

    Disassembly procedure Bottom Case Module B O T T O M The illustrations below show how to disassemble and remove the bottom case module of the notebook. The module contains the bottom case itself, speaker sets and Motherboard. C A S E M O D U L E Removing Motherboard M O T H E R B O A R D...

  • Page 24

    Disassembly procedure Remove the motherboard from the bottom case. Remove 1 screw [M2 * 4(L)] and remove DC-IN bracket. Remove 1 screw [M2 * 4(L)] and remove the bracket then disconnect the cable and remove the Bluetooth board. 2 - 24...

  • Page 25

    Disassembly procedure Motherboard Module M O T H E R B O A R D Removing Modem Module M O D U L E Remove 4 tapes and remove 2 screws [M2 * 4(W)] and disconnect the cable then take away the modem module. Remove 3 screws [M2 * 4(W)] and take away the VGA thermal module.

This manual also for:

A7v

Comments to this Manuals

Symbols: 0
Latest comments: