Removing Expresscards - Fujitsu LifeBook A6210 User Manual

•
I
NSTALLING OR REMOVING AN
PROCESS MAY DAMAGE THE CARD AND
•
D
O NOT INSERT AN
THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD
Y
OU MAY BE REQUIRED TO LOG ON AS
G
ROUP TO COMPLETE THIS PROCEDURE
NETWORK POLICY SETTINGS MAY ALSO PREVENT YOU FROM COMPLETING THIS PROCEDURE
See your ExpressCard manual for instructions on the installation of your card. Some cards may require
that your notebook is off while installing them.
To install an ExpressCard, follow these steps:
1
Make sure there is no ExpressCard currently in the slot. If there is, see Removing ExpressCards.
2
If the eject button is extended, press it in until it clicks.
3
Insert your ExpressCard into the slot with the product label facing up. If you are inserting a 34 mm card, be sure
to align it with the left side of the slot when inserting it.
4
Push the card firmly into the slot until it is seated in the connector.

Removing ExpressCards

See your ExpressCard manual for specific instructions on removing your card. Some cards may
require your notebook to be in Sleep Mode or Off during removal.
•
R
EMOVE DEVICES USING THE
RIGHT OF YOUR SCREEN
•
I
F THE DIALOG BOX STATES THAT THE DEVICE CANNOT BE REMOVED
OPEN FILES
E
XPRESS
E C
XPRESS ARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON
A
S R
AFELY
.
,
CLOSE ANY OPEN APPLICATIONS AND SHUT DOWN YOUR NOTEBOOK
74 - PC Cards/ExpressCards™
C
ARD DURING YOUR NOTEBOOK
/ .
OR YOUR NOTEBOOK
,
YOUR NOTEBOOK
DMINISTRATOR OR A MEMBER OF THE
. I
F YOUR COMPUTER IS CONNECTED TO A NETWORK
H
EMOVE ARDWARE ICON IN THE SYSTEM TRAY AT THE BOTTOM
'
S SHUTDOWN OR BOOTUP
, .
OR BOTH
A '
DMINISTRATOR S
,
.
,
YOU MUST SAVE ALL OF YOUR
.