Cisco 6500-E Installation And Verification Manual page 8

Communication media module for catalyst 6500 series switch and cisco 7600 series router
Hide thumbs Also See for 6500-E:
Table of Contents

Advertisement

Safety Overview
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
If the symbol of suitability with an overlaid cross appears above a port, you must not connect the
Warning
port to a public network that follows the European Union standards. Connecting the port to this type
of public network can cause severe personal injury or can damage the unit. Statement 1031
Warning
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
Warning
beams or view directly with optical instruments. Statement 1051
Blank faceplates and cover panels serve three important functions: they prevent exposure to
Warning
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
Hazardous voltage or energy is present on the backplane when the system is operating. Use caution
Warning
when servicing. Statement 1034
Warning
Before opening the unit, disconnect the telephone-network cables to avoid contact with
telephone-network voltages. Statement 1041
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Warning
Never install telephone jacks in wet locations unless the jack is specifically designed for
wet locations. Statement 1036
Cisco Communication Media Module for Catalyst 6500 Series Switch and Cisco 7600 Series Router Installation and Verification Note
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents