Returning A Call; Deleting A Record From The Una-List - Fujitsu SRS-1050 User Manual

SRS -1050 Local Features (
12:15PM WED APR 5
UNA-LIST DATA CLEAR
To see the data for each unanswered call, press UNA (softkey 1). The resulting screen looks something like this:
777-1111
4-05..........................................................................12:15PM
11:10AM ...................................................................Saturday March 2
UNA-LIST DATA CLEAR
The 777-1111 is the number of the calling party.
Note: The call time indication is based on the phone's calendar/clock. To ensure accurate reporting, be sure the
calendar/clock is set properly (see Chapter 3).
Each time you press UNA (softkey 1), the data for the next unanswered call is displayed. The list cycles: the first
display is information from the oldest call, then the next oldest call, and so forth. After the data for the most recent
unanswered call is displayed, pressing UNA again shows the oldest call's data.
If a new unanswered call is from the same party as one already in the UNA list, only the new call's data is retained.
This feature prevents filling all eight available positions with calls made from the same phone.
Each record is retained until you follow the deletion procedure described below, or until another unanswered call
stores new information over it.

Returning a Call

To return a call displayed by unanswered call logging, follow these steps:
1. Press any idle Call Appearance button. (Handsfree mode is automatic. For handset use, lift the handset.)
You can also dial the number while onhook, and then lift the handset or press SPEAKER after dialing all the digits.
2. Dial the number shown on the UNA display.
As soon as you go offhook or begin dialing the number while onhook, the unanswered call number shifts to the
second line for reference. The first line shows the digits you are dialing.
If the call is answered, you can converse with the party reached. If not, hang up by replacing the handset in its
cradle or, in handsfree mode, hang up by pressing the SPEAKER button.
If the UNA dot on the display is flashing, you should delete at least one entry to prevent the loss of the oldest
entry.

Deleting a Record from the UNA-LIST

To delete a record, press UNA (softkey 1) until the record is displayed, and then press # and CLEAR (softkey 3).
To see or delete the next UNA record, you must press UNA again.
---------------------------------------
Page 3-42
DIR-LIST
DIR-LIST
Chapter 3