Table of Contents
Advertisement
When the pop-up menu is displayed,
select New Dest. to set your location
as a replacement destination, or
Waypoint to set as a waypoint.
The system will return to the map
screen and recalculate the route to your
new destination or waypoint.
Entering a Destination from the
Menu Screen (while en route)
If you say "Menu", or press the MENU
button and select the "Dest. MENU
1" or "Dest. MENU 2" tab, the system
displays the MENU screen. Follow
the procedure described in Entering a
Destination, which begins on page
When the Calculate route to screen is
displayed, select OK and push in on the
Interface Dial.
When the pop-up menu is displayed,
select New Dest. to set your location
as a replacement destination, or
Waypoint to set as a waypoint.
The system will return to the map
screen and recalculate the route to your
specifi ed new destination or waypoint.
2010 TL
Driving to Your Destination
Continue Trip to Screen
If you restart the vehicle without having
completed your prior trip, you will see
the following screen:
28
.
• To continue to your destination or
other waypoints, say or select OK.
• To cancel your destination, press
the CANCEL button or the BACK
button on the steering wheel, or
using the voice control system, say
"Cancel" or "Back."
• If you wish to change the routing
method, select Route Pref. by using
the Interface Dial.
• For additional information on
changing the routing method, see
Changing the Routing Method on
page
52
.
Navigation System
77
Advertisement
Table of Contents
