Frequently Asked Questions - Honda 2010 TL Navigation Manual

Frequently Asked Questions

Map and Features, Voice Operation, Entering Addresses
Problem
Why does the Disclaimer screen need to be displayed
every time I start the car? I am the only driver.
I tried entering an address, but the city or street could
not be found. Is there any other way to route to the
location?
When I enter an address, some letters become grayed
out. Is this normal?
How do I delete Personal Addresses, Previous
Destinations, or the Home Address?
I cannot hear the navigation system voice.
The voice control system is having diffi culty recognizing
my voice commands.
When the system pronounces the street name in the
guidance command or reads the destination address, it
sounds strange. What causes this?
When I drive at night, the screen is bright and will not
switch to the night display mode. Why?
Frequently Asked Questions
146 Navigation System
The Disclaimer screen reminds you and your guest drivers to always operate
the navigation system in a safe manner.
Some cities are lumped in with a major metro area. Try entering the street
fi rst. In rural "unverifi ed" areas or new subdivisions, streets may be missing,
or only partially numbered. Try selecting the destination directly from the
map. See By Map Input on page
Yes. As you enter each letter in an address or a point of interest (POI), the
system looks in the database to see what letters are possible and "grays out"
letters that do not apply.
This is done in the SET UP screen (Main Set up), under "Personal
Information." See page 93 .
1) Ensure that Volume in the SET UP screen (Main Set up) is not OFF.
See page 93 .
2) Go to "Basic Settings" in the SET UP screen (Other), and set Voice
Recognition Feedback to ON. See page
Ensure that the vents are not blowing on the microphone on the ceiling, the
vehicle is as quiet as possible, and you are using the correct command when
speaking (see Improving Voice Recognition on page
screen to see a list of the applicable voice commands. If the system cannot
recognize your command because of background noise, speak louder.
The basic guidance phrase uses a studio-recorded voice, but the street name
is pronounced by the system using a machine-generated voice. Consequently,
the name may be mispronounced or sound strange at times.
Verify the following: The nighttime dash brightness control is not set to
maximum, and Map Color in SET UP is set to Black for Night. See
Switching Display Mode Manually on page
2010 TL
Solution
45 .
101 .
14 ). Say "Help" at any
114 .