The following figures show the underside of the computer. You should
ensure that the display is closed before the computer is turned over to
avoid causing any damage.
1. Battery lock
2. Battery release latch
Product appearance depends on the model you purchased.
Battery release latch
Memory module slot
Do not block the cooling vents. Keep foreign metal objects, such as
screws, staples and paper clips, out of the cooling vents. Foreign metal
objects can create a short circuit, which can cause damage and fire,
possibly resulting in serious injury.
Carefully clean the dust on the cooling vents' surface using a soft cloth.
Figure 3-5 The underside of the computer
Slide the battery lock to release the battery pack
ready for removal.
Slide and hold this latch into its "Unlock" position
in order to release the battery pack for removal.
For more detailed information on removing the
battery pack please refer to the
The memory module slot allows for the
installation, replacement and removal of
additional memory module.
The size of the memory modules varies
depending on the model. The actual amount of
useable system memory will be less than the
installed memory modules.
Refer to the
The cooling vents help the processor to avoid
3. Memory module slot
4. Cooling vents
Additional memory module