Real Time Clock
The BIOS setting
and system date/
time are lost.
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to the
Output to screen is
Internal display panel
Apparent computer's display panel problems may be related to the
computer's setup and configuration.
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and time
in the BIOS setup application by using the
In the Settings charm, click Power and then
Hold down the F2 key and then release this
key one second after the computer is power
on - the BIOS setup utility will load.
Set the date in the System Date field.
Set the time in the System Time field.
Press F10 - a confirmation message will be
Press the ENTER key - the BIOS setup
application will end and the computer will
Please refer to your software's documentation to
ensure that it is not remapping the keyboard in any
way (remapping involves changing or reassigning
the function of each key).
If you are still unable to use the keyboard, you
should contact TOSHIBA Support.
Press the function keys to adjust the display
priority, and to make sure it is not set for output to
an external monitor.
section for further information.