Connecting To The Network Through Lan Interface - Pioneer Elite VSX-70 Manual Rapide

Connecting a TV and playback
components
HDMI/DVI-compatible TV
HDMI/DVI-compatible
Blu-ray DIsc player
HDMI OUT HDMI IN
BD IN
IN 2 IN 3 IN 4 IN
( SAT/CBL ) ( DVR/BDR )
OUT 2
HDMI
(HDZONE) IN 1 BD IN IN 2 IN 3 IN 4 IN 6 IN 7 OUT 1
ASSIGNABLE
1 7 -
(DVD) (SAT/CBL) (DVR/BDR) (CONTROL)
SELECTABLE
• If the TV does not support the HDMI Audio Return Channel
function, optical digital cable (
A
listen to the TV sound over the receiver.
• If the TV supports the HDMI Audio Return Channel function,
the sound of the TV is input to the receiver via the HDMI
terminal, so there is no need to connect an optical digital
cable ( ). In this case, set ARC at HDMI Setup to ON
A
4
" HDMI Setup "
Connecting antennas
DIGITAL OUT A
OPTICAL
AM LOOP
FM UNBAL
75
6 IN 7 OUT 1
ANTENNA
Connecting to the network through
( CONTROL )
LAN interface
OPTICAL
IN ( TV )
1
ASSIGNABLE
LAN (10/100) Computer
DC OUTPUT
for WIRELESS LAN
( OUTPUT 5 V
0.6 A MAX )
OPTICAL
IN 1 (TV)
ASSIGNABLE
COAXIAL
IN (DVD)
1
ASSIGNABLE
) connection is required to
l
AM loop antenna
1 2
AM LOOP
FM UNBAL
75
ANTENNA
FM wire antenna
Internet
Modem
LAN cable (sold separately)
LAN (10/100)
LAN
( 10/100 )
Note
• Refer to the operating instructions in the included CD-
ROM if you wish to connect a TV or playback component
in a method other than an HDMI connection.
• Refer to the operating instructions in the included CD-
ROM for other device connections.
CAUTION
• Handle the power cord by the plug part. Do not pull out
the plug by tugging the cord, and never touch the power
cord when your hands are wet, as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, or other object on the power cord or pinch the
cord in any other way. Never make a knot in the cord or tie
it with other cables. The power cords should be routed so
that they are not likely to be stepped on. A damaged power
cord can cause a fire or give you an electric shock. Check
the power cord once in a while. If you find it damaged,
ask your nearest Pioneer authorized independent service
company for a replacement.
VENTILATION CAUTION
When installing this unit, make sure to leave space
Router
around the unit for ventilation to improve heat radiation
(at least 40 cm at top, 10 cm at rear, and 20 cm at each
WAN
side).
LAN WARNING
1
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
2
and to protect it from overheating. To prevent fire
3
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
CAUTION:
HOT SURFACE. DO NOT TOUCH.
The top surface over the internal
heatsink may become hot when
operating this product continuously.
Connecting up (continued)
D3-4-2-1-7b*_A1_En