Fujitsu PRIMERGY TX150 S4 Information Manual page 8

B1
PRIMERGY Floorstand
SNP:SY-F1647E301-P
Installation ex works for one
server or subsystem
Hereby the rack will be delivered
completely pre-mounted and
all wired connections are tested
With racks 12U, 24U, 38U:
Systems and components
will be delivered installed in the rack
With racks 46U:
Systems and components
will be delivered separately
To be ordered only together with
a PRIMERGY-
PRIMECENTER rack
e.g.:SNP:SY-K614V10x-P
S26361-K826-V10x
refer configurator PC-rack
max. 1x per System
For later conversion of TX150 base unit floorstand into base unit rack the following kit is availible
1.) Conversion TX150S4 base unit floorstand into base unit rack
rack mount kit has to be ordered separately
For (later) mounting in racks the following kits are available:
1.) PRIMERGY Classic-rack 42/23U adapter kit:
incl. cable carrier
2.) PRIMERGY DC- / PC- rack mounting kit:
incl. DC- PC- bracket, cable managment
3.) PRIMERGY mounting kit for server racks
conforming to EIA standards EIA-310-D for 19" racks.
C
B2
PRIMERGY Rack
PRIMECENTER- Rack
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX150 S4
"rack-mounting ex factory"
This service is to be ordered once
per installable server/storage
subsystem, in order to get the
server/storage subsystem
mounted into the PRIMERGY racks.
In case of the 46 U PRIMERGY rack,
this service has to be ordered,
to get the mounting kits and the
cables installed.
S26361-F2618-L240
S26361-F1331-L300
S26361-F2734-L32
S26361-F2734-L32
Status 25.11.2005
8 of 18