Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 54

console(8)
EXTENDED
DESCRIPTION
EXIT STATUS
SEE ALSO
32 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
Sets up a connection to a read-only console.
-r
-s escapeChar Specifies an escape character. The default is "#" . The character
specified for escapeChar must be enclosed in "" "" (double
quotation). The following symbols can be specified for
escapeChar:
"#", "@", "^", "&", "?", "*", "=", ".", "|"
Specified escape character is available only in the session that
executed the console(8) command.
Automatically answers "y" (yes) to all prompts.
-y
When the command is executed, a prompt to confirm execution of the command
■
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
The domain console regards "#" used at the beginning of a line as an escape
■
character. An escape character is specified to instruct the console to perform
special processing. Examples of processing that can be specified in combination
with "#" are as follows.
"#" and "?" Outputs a status message.
"#" and "." (period) Disconnects the console.
To enter "#" at the beginning of a line, enter "#" twice.
■
To display information on the currently connected domain console, use the
■
showconsolepath(8) command.
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
sendbreak(8), showconsolepath(8)