NAME
showntp - display the NTP information which currently set for XSCF
SYNOPSIS
showntp {-l | -a | address | -s | -m}
showntp -h
DESCRIPTION
The showntp(8) command displays the NTP information currently set for XSCF.
The showntp(8) command can display the following information:
■
■
■
■
You must have one of the following privileges to run this command:
Privileges
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS
The following options are supported:
-a
-h
-l
-m
-s
NTP servers which have been registered to the XSCF network
Status of synchronization with the NTP servers
Stratum value which has been set to XSCF
Designation of preferred server
Displays all the NTP servers currently set for the XSCF network.
Displays usage statement. When used with other options or
operands, an error occurs.
Displays whether synchronization with an NTP server is being
maintained.
Displays whether a preferred server designated. Either of the
following is displayed:
on
off
Displays the stratum value which has been set to XSCF.
Preferred server has been designated.
Preferred server not designated.
System Administration
showntp(8)
415