Showmonitorlog - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showmonitorlog - display the contents of monitoring messages in real time
SYNOPSIS

showmonitorlog

showmonitorlog -h
DESCRIPTION The showmonitorlog(8) command displays the contents of monitoring messages
in real time.
When executed, the showmonitorlog(8) command will not terminate in order to
display the monitoring message log, and the XSCF shell is occupied for the display.
When a monitoring message is registered, the contents of the message are
displayed.
To stop the real-time display, press the "Ctrl" and "C" key combination.
You must have one of the following privileges to run this command:
Privileges
platadm, platop, fieldeng
Refer to setprivileges(8) for more information.
The following option is supported:
OPTIONS
-h
EXAMPLES
EXAMPLE 1
EXIT STATUS The following exit values are returned:
0
>0
Displays usage statement.
Displays the contents of a monitoring message in real time.
showmonitorlog
XSCF>
Apr 13 12:32:16 XXXXX Alarm: /CMU#1,/CMU#0/DDC#0:ANALYZE:SC-IOU I/F fatal
error 0x00000000;
:
:
Successful completion.
An error occurred.
showmonitorlog(8)
System Administration 403