Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 413

Xscf control package (xcp) 109x
Hide thumbs Also See for SPARC Enterprise M3000:
Table of Contents

Advertisement

Log collection date and time (month day hour:minute:second
Date:
time-zone year)
The displayed time is the local time.
Error code
Code:
Data is displayed in 16-byte format.
Date (Month Day Hour: Minute: Second TimeZone Year) when
Occurred:
an error occurred.
This date is displayed as the local time.
Error status
Status:
Either of the following is displayed:
Warning
Alarm
Suspected faulty unit
FRU:
The suspected faulty units that are displayed and delimited by a
"," (comma) are the units most likely and second most likely to
be faulty. If there are three suspected faulty units, an "*" is
displayed next to the unit third most likely to be faulty. Display
of more than two suspected faulty units depends on whether
more than two suspected faulty units are detected.
Error description
Msg:
Detailed error code
Diagnostic
Code:
The displayed code is a hexadecimal number.
Abbreviation for Universal Unique Identifier
UUID:
This is a globally unique ID that is a 32-digit hexadecimal
number.
Unique message ID
MSG-ID:
Detailed message
Diagnostic
Messages:
If the log has a detailed message, it is displayed.
Scan log code
Detail log:
This code is displayed when the log includes a scan log.
Address: Displayed in hexadecimal notation.
Partial degradation of the unit or warning
about the FRU
FRU failure or error
System Administration
showlogs(8)
391

Advertisement

Table of Contents
loading

Table of Contents