Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 366

showdscp(8)
OPTIONS
EXAMPLES
344 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2008
The following options are supported:
-d domain_id Displays an individual domain's IP address.
Displays usage statement.
-h
When used with other options or operands, an error occurs.
Generates parsable output.
-p
Displays the Service Processor's IP address.
-s
Specifies verbose output. Prints additional information about
-v
internal progress of the program's operations to the screen.
Caution – The IP addresses shown in the following examples are examples only.
Displaying a Table of All DSCP IP Addresses
EXAMPLE 1
showdscp
XSCF>
DSCP Configuration
Network: 10.1.1.0
Netmask: 255.255.255.0
Location Address
---------- ---------
XSCF 10.1.1.1
Domain #00 10.1.1.2
Domain #01 10.1.1.3
Domain #02 10.1.1.4
Domain #03 10.1.1.5
Domain #04 10.1.1.6
Domain #05 10.1.1.7
Domain #06 10.1.1.8
Domain #07 10.1.1.9
Domain #08 10.1.1.10
Domain #09 10.1.1.11
Domain #10 10.1.1.12