Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 355

-p force
-p query
-v
OPERANDS The following operand is supported:
xsb
EXTENDED You can execute the showdevices(8) command under the environment where the
DESCRIPTION following services, managed by the Solaris Service Management Facility (SMF), are
in operation:
■
■
■
EXAMPLES
EXAMPLE 1
Predicts system resources deleted from the Solaris OS when an
XSB is forcibly disconnected by "deleteboard -f" command. If
the -p option is omitted, "-p bydevice" is used.
Predicts system resources deleted from the Solaris OS when an
XSB is disconnected by deleteboard command. If the -p option
is omitted, "-p bydevice" is used.
Displays information on all I/O devices, including those that are
not management targets. As information on the I/O devices that
are not management targets, however, only physical
configurations are displayed, and resources and use states are not
displayed.
Specifies the XSB number for which information is to be
displayed. The following xsb form is accepted:
x–y
where:
x
y
Domain SP Communication Protocol (dscp service) is working properly and the
network with XSCF has been established
Domain Configuration Server (dcs service) is working properly
Sun cryptographic key management daemon (sckmd service) is working
properly
Displays the information of the physical devices configured on the XSB#00-0
and their available resources.
showdevices 00-0
XSCF>
CPU:
----
DID XSB id state
An integer from 00–15.
An integer from 0–3.
speed ecache
showdevices(8)
System Administration 333