setupplatform(8)
EXAMPLES
282
SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
In network setup, the following items can be optionally configured:
XSCF Network Settings
■
Internal DSCP Network
■
DNS
■
NTP
■
SSH
■
HTTPS Server
■
Email reports
■
Creating a New User.
EXAMPLE 1
setupplatform -p user
XSCF>
Do you want to set up an account? [y|n]:
myadminuser
Username:
User id in range 100 to 65533 or leave blank to let the system
choose one:
Username: myadminuser
User id:
Are these settings correct? [y|n]:
XSCF> adduser myadminuser
XSCF> setprivileges myadminuser useradm platadm platop
XSCF> password myadminuser
New XSCF password: [not echoed]
Retype new XSCF password: [not echoed]
Configuring the XSCF Network.
EXAMPLE 2
setupplatform
XSCF>
Do you want to set up an account? [y|n]:
Do you want to set up the XSCF network interfaces? [y|n]:
Do you want to configure xscf#0-lan#0? [y|n]:
xscf#0-lan#0 ip address? []:
xscf#0-lan#0 netmask? [255.255.255.0]:
xscf#0-lan#0 default gateway? []:
xscf#0-lan#0 ip address: 192.168.1.4
xscf#0-lan#0 netmask: 255.255.254.0
y
y
n
y
192.168.1.4
255.255.254.0
192.168.1.1
y