Download  Print this page

American Audio Q-2411 User Manual And Reference Manual Page 13

American audio mixer user manual q-2411.
Hide thumbs

Advertisement

Q-2411™
and a compatible American Audio
your CD player, connect from the CD player controller out jack to this jack. Player A "Q-Start"
functionallity will be controlled by the left side of the CROSSFADER (16). For more information on
"Q-Start" functionallity refer to the user manual included with your CD player. Be sure to only use
the mono tip mini plug included with your CD player to avoid damage to the mixer and/or the CD
player.
PLAYER 2 CONTROL - This jack is used to control the "Q-Start" function between the mixer
and a compatible American Audio
your CD player, connect from the CD player controller out jack to this jack. Player B "Q-Start"
functionallity will be controlled by the right side of the CROSSFADER (16). For more information on
"Q-Start" functionallity refer to the user manual included with your CD player. Be sure to only use
the mono tip mini plug included with your CD player to avoid damage to the mixer and/or the CD
player.
31. BALANCED XLR MASTER OUTPUTS JACKS - The Master Output includes a pair of XLR
Balanced jacks as well as a pair of RCA UNBALANCED JACKS (29). The 3-pin XLR jacks send a
high current balanced output signal. These jacks should be used when you will be driving an amp or
other audio equipment with a balanced input, or whenever you will be running a signal line greater
than 15 feet. Always, use these jacks whenever possible.
32. AC CONNECTION - This connector is used to supply main power to the unit via the included
detachable power cord. The power connection uses an I.E.C. type connector, use only the supplied,
polarized AC power cord. Use only a power cord that matches this type of connection. Be sure to
only connect this unit to a power outlet that matches the printed power label on the unit. Never use
a power cord when the ground prong has been removed or broken off. The ground prong is used to
reduce the risk of electrical shock in case of an electrical short. This cord is designed to fit in one
direction only. Do not attempt to force a cord if it does not fit, be sure the cord is being inserted
properly.
33. AC VOLTAGE SELECTOR - This switch is used to change the operating voltage. Operating
voltage can be toggled between 115v or 230v/50~60Hz. Be sure the selector is set to the proper
voltage for your area before attempting to operate the unit. Always be sure main power is shut off
before change the position of the Voltage Selector Switch.
REAR PANEL - CONTROLS AND FUNCTIONS CONT.
or American DJ
®
or American DJ
®
American Audio
- www.americanaudio.us - Q-2411™ Instruction Manual Page 13
©
®
CD Player. Using the mini plug included with
®
CD Player. Using the mini plug included with
®

Advertisement

Table of Contents

   Also See for American Audio Q-2411

   Related Manuals for American Audio Q-2411

Comments to this Manuals

Symbols: 0
Latest comments: