Audio Settings And Video Adjust; Audio Settings Menu - Yamaha PianoCraft DRX-730 Owner's Manual

Chapter 9: Audio Settings and Video Adjust
This chapter explains the Audio Settings and Video
Adjust menus.

Audio Settings menu

These settings only affect disc playback.
SETUP
ENTER
1
Press SETUP.
The Setup menu appears on-screen.
2
Select "Audio Settings," and then press ENTER.
The Audio Settings menu appears on-screen.
Audio Settings
Audio DRC High
Dialog Medium
Low
Off
3
Use the cursor buttons ( / / / ) and
ENTER to select and change the settings.
The settings are explained below.
4
To close the Setup menu, press SETUP.
Note:
• The effects of the Audio settings depends on your
speakers, TV, and AV receiver's volume level and
other settings. For each setting, switch between
the available options and choose the one that
provides the best results.
50
En
TOP MENU MENU
PRESET
INFO.
A E ENTER A E
SETUP RETURN
VOLUME
MEMORY
AUTO/
MANUAL
BAND TUNER
DVD/USB AUX/PORTABLE DOCK
SOUND PURE DIRECT MUTE
TIMER SLEEP DIMMER DISPLAY
Audio DRC
The Audio DRC (Dynamic Range Control) function
makes loud sounds quieter and quiet sounds louder,
which is ideal for watching movies late at night when
you don't want to disturb anyone.
• High, Medium, Low, Off (default).
Notes:
• Audio DRC only works with Dolby Digital
sources.
• With some discs, Audio DRC may have little or no
effect.
• The Audio DRC function also applies to digital
output signals when the Digital Out setting is set
to On and the Dolby Digital Out setting is set to
Dolby Digital > PCM. See page 52 for details on
the digital audio output settings.
• The Audio DRC function also applies to audio
output from the HDMI output, with the same
restrictions as above.
Dialog
When watching a movie or other material on a DVD-
Video disc, depending on the audio format, the center
channel may be too quiet and difficult to hear. With
the Dialog function, you can make the dialog louder
and easier to hear.
• High, Medium, Low, Off (default).
Notes:
• When using the Dialog function, depending on
the source material, the dialog may distort, in
which case you should select a lower setting.
• The Dialog function also applies to digital output
signals that have been converted to 2-channel
PCM. See page 52 for details on the digital audio
output settings.
• The Dialog function also applies to audio output
from the HDMI output, with the same
restrictions as above.