Appendix3 Replacing Consumables; Replacing The Pad Assy; Replacing The Pick Roller - Fujitsu fi-5530C Getting Started

Appendix3
During its operation, the inside
ARNI N G
glass of the ADF becomes very
hot .
Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least
15 minutes.
■ Consumables and Replacement
Cycle
The followings are the specifications of consumables
and their recommended replacement cycles.
Description Parts No.
Pad ASSY PA03334-
0002
Pick roller PA03334-
0001
To purchase consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scanner
service provider.
The replacement cycles above are rough guidelines
when using A4/Letter woodfree or wood containing
2
paper 64 g/m (17 lb). This cycle varies according to the
type of the used paper and how frequently the scanner is
used and cleaned.
Use only the specified consumables.
ATTENTION
REPLACING CONSUMABLES
Standard
Replacement Cycle
After 100,000 scans or
one year
After 200,000 sheets
or one year
fi-5530C Image Scanner Getting Started
The following illustrations show the locations of the
consumables. Refer to "Chapter 4 Replacing Consum-
ables" fi-5530C Operator's Guide on the Setup
CD-ROM.

■ Replacing the Pad ASSY

To remove
Pad ASSY

■ Replacing the Pick Roller

To attach
Sheet guide
Pick roller
AP-5