Settings - Maytag MIT8795BS Use And Care Manual

The Settings function enables you to personalize audible tones
and oven operation to suit your needs. After completing your
adjustments, press any CANCEL or wait 30 seconds for the
display to show the time of day. To change any of the following
settings, press SETTINGS until the correct display text appears,
and then follow the instructions in the appropriate section. See
the following "Settings Quick Reference Chart."
Settings Quick Reference Chart
Display Text Default Setting
TEMP UNIT Fahrenheit
SOUND On
SOUND VOLUME High
END TONE On
KEYPRESS TONE On
REMINDER TONE On
12/24 HOUR 12 Hr
SABBATH Off
12 Hr AUTO_OFF On
LANGUAGE English
TEMP CALIB Upper Calibrate
Temp Unit (Fahrenheit and Celsius)
The temperature is preset at Fahrenheit, but can be changed to
Celsius.
1. Press SETTINGS until "TEMP UNIT" is displayed.
2. Press the Temp/Time "+" keypad to adjust the setting.
3. Press any START or CANCEL to save the setting and exit.
Sound (Tones)
Tones are audible signals, indicating the following:
Basic Functions
One tone
Valid pad press
End of Oven Timer (long tone)
Function has been entered
Oven is preheated
Three tones
Invalid pad press
Four tones
End of cycle
Sound (Adjust On or Off)
The oven sound is factory set for On but can be changed to Off.
1. Press SETTINGS until "SOUND" is displayed.
2. Press the Temp/Time "+" keypad to adjust the setting.
3. Press any START or CANCEL to save the setting and exit.

Settings

To change Setting
Press (+) for Celsius
Press (+) for OFF
Press (+) for LOW
Press (+) for OFF
Press (+) for OFF
Press (+) for OFF
Press (+) for 24 HR
Press (+) for ON
Press (+) for OFF
Press (+) for French
Press (-) for Spanish
Press (+) for LOWER
CALIBRATE
Sound Volume (Adjusting Sound Volume)
The oven sound is factory set for High but can be changed to
Low.
1. Press SETTINGS until "SOUND" is displayed.
2. Press the Temp/Time "+" keypad to adjust the setting.
3. Press any START or CANCEL to save the setting and exit.
End Tone (Adjusting End Tone On or Off)
The end tone is factory set for On but can be changed to Off.
1. Press SETTINGS until "END TONE" is displayed.
2. Press the Temp/Time "+" keypad to adjust the setting.
3. Press any START or CANCEL to save the setting and exit.
Keypress Tone (Adjusting Keypress Tone On or Off)
The keypress tone is factory set for On but can be changed to
Off.
1. Press SETTINGS until "KEYPRESS TONE" is displayed.
2. Press the Temp/Time "+" keypad to adjust the setting.
3. Press any START or CANCEL to save the setting and exit.
Reminder Tone (Adjusting Reminder Tone On or Off)
The reminder tone is factory set for On but can be changed to
Off.
1. Press SETTINGS until "REMINDER TONE" is displayed.
2. Press the Temp/Time "+" keypad to adjust the setting.
3. Press any START or CANCEL to save the setting and exit.
12/24 Hour (Adjusting the Clock Format)
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
1. Press SETTINGS until "12/24 HOUR" is displayed.
2. Press the Temp/Time "+" keypad to adjust the setting.
3. Press any START or CANCEL to save the setting and exit.
Sabbath (Sabbath Mode)
Sabbath Mode configures the range to conform to Star-K Jewish
Sabbath requirements for a Bake cycle, including Timed Bake or
Delayed Bake functions. Refer to the "Sabbath Mode" section for
a full description of this feature. Sabbath Mode is factory set for
disabled, but can be changed to enabled.
1. Press SETTINGS until "SABBATH" is displayed.
2. Press the Temp/Time "+" keypad to adjust the setting.
3. Press any START or CANCEL to save the setting and exit.
12 Hr Auto Off (Adjust On or Off)
The oven control is set to automatically shut off the oven
12 hours after the oven turns on. This will not interfere with any
timed or delayed cook function.
1. Press SETTINGS until "12 Hr AUTO_OFF" is displayed.
2. Press the Temp/Time "+" keypad to adjust the setting.
3. Press any START or CANCEL to save the setting and exit.
Language (Change Language Options)
The Language is factory preset to English but can be changed to
French or Spanish.
1. Press SETTINGS until "LANGUAGE" is displayed.
11