Changing The Projection Mode Using The Menus; Image Aspect Ratio - Epson EX3220 Manual

3. To change projection back to the original mode, hold down the A/V Mute button for five seconds
again.
Parent topic:

Changing the Projection Mode Using the Menus

You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the
projector menus.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Extended menu and press Enter.
4. Select the Projection setting and press Enter.
5. Select a projection mode and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic:

Image Aspect Ratio

The projector can display images in different width-to-height ratios called aspect ratios. Normally the
input signal from your video source determines the image's aspect ratio. However, for certain images
you can change the aspect ratio to fit your screen by pressing a button on the remote control.
Projection Modes
Projection Modes
77