Selecting The Connected Usb Source; Disconnecting A Usb Device Or Camera From The Projector; Connecting To A Document Camera - Epson EX3220 Manual

Selecting the Connected USB Source

You can switch the projector's display to the source you connected to the USB-A port.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the USB button on the remote control.
3. Press the button again to cycle through other USB sources, if available.
Parent topic:

Disconnecting a USB Device or Camera From the Projector

When you finish presenting with a connected USB device or camera, you must prepare to disconnect the
device from the projector.
1. If the device has a power button, turn off and unplug the device.
2. Disconnect the USB device or camera from the projector.
Parent topic:

Connecting to a Document Camera

You can connect the Epson DC-06 document camera to your projector's USB-A port to project images
viewed by the camera.
Note: For additional features supported by software, connect the Epson DC-06 document camera to
your computer instead of the projector. You may be able to connect different Epson document camera
models to your projector's Computer port. See the document camera's manual for instructions.
1. Locate the USB cable that came with the document camera.
2. Connect the USB cable to the projector's USB-A port.
3. Connect the other end of the cable to the document camera's USB Type B port.
Parent topic:
Connecting to External USB Devices
Connecting to External USB Devices
Projector Connections
38