Epson XP-950 Quick Manual page 3

To load paper, follow the steps below.
1. Open the front cover. If the output tray is open, close it before going to the next step.
(As you slide in the output tray, there may be slight resistance and noise. This is
normal.)
2. Pull out the paper cassette and slide the edge guides outward.
Note: If you do not see the upper cassette, it may be pushed into the printer. Remove the
lower cassette, then carefully pull out the upper cassette.
3. Set the front edge guide to the position for the paper size you are using. Insert paper
with the glossy or printable side facedown, then slide the side edge guides against the
paper, but not too tight.
Upper
cassette
Upper cassette
Lower
cassette
Lower cassette
Loading Paper
3