Operation; Switch; Attaching Dust Bag; Removing Dust Skirt - Craftsman 315.116131 Owner's Manual

sYlrcH
-sANDER
( Fo R VA C UU M ) Fi s.z
DUST EXHAUST HOLE
(FOR DUST BAG)
Before attemDting to use your Sander, familiarize yourself
with aff opeiatin-g features (See Fig t) and safety re'
ouirements.
swlTcH
Your sander is equipped with a switch located on the rear
handle ol your sdnd'ir. To turn your sander "on", push the
"on" side-of the switch. See-Figure t. Toturn your sander
"of f" . ou s h the " off " si de of t he switch '
ATTACHII{G DUST BAG
DISCONNECT SANDER FROM POWER SUPPLY WHILE
ASSEMBLING PARTS OR MAKING ADJUSTMENTS
1. Place opening in dust bag reiainer over dust exhaust hole
and secure into position. See Figurc 2.
2. Your sander is now ready tor operation using the buill-in
dust collection system. NOTE: For more efticient opera'
tion, empty bag when halt full. To removedust bag, simp-
ly grasp dust bag retainer and pull away from sander.
RET{OVING DUST SKIRT
DISCONNECT SANDER FROM POWER SUPPIY WHILE
ISSCilSLINC PARTS OR TIIAKING ADJUSTMENTS.
Your tool comes packed wilh the dusl skirt installed'
However, if ctesired your sander can be operated without the
dust skirt.
1. Remove dust bag from sander.
2. Remove dust cap from hole on rear of dust skirt'
3- Carefully spread dust skirt apart and remove lrom sander'
4. To replace, reverse the above procedure.
NOTE: BE suRE TO FIT DUsr SKIRT lN cROqyE,q!
itioron xousttlc AND REPLAcE DUsr cAP oN REAR oF
DUST SKIBT.
A dustless Sanding Attachment Kit (Cat. # 9 11766)
is available from Sears Catalog Order or Retail
Stores.
ATTACHING TO VACUUM CLEANER
DISCONNECT SANDER FROM POWER SUPPLY
WHILE ASSEMBLING PARTS OR MAKING AD.
JUSTMENTS
1. Remove dust cap from hole on rear ot dust skirt.
See Figure 2.
2. Snugly attach vacuum hose adapters to vacuum
hose.
3. Connect the pickup adapter end of your hose to
dust exhaust hole, located on rear of dust skirt.
See Figure 2.
4. Connect the vac adapter end of the hose to your
vacuum cleaner.
Page 4
illak€ sur€ power supply is 110'120 Volts' 60 Hz' AC only'