Download Print this page

Advertisement

5
Remove the screws that secure the system board to the computer base.
6
Lift the system-board assembly at an angle and release the system-board ports
from the slots on the computer base.
7
Lift the system-board assembly off the computer base.
1
screws (5)
8
Turn the system-board assembly over.
9
Remove the screws that secure the hard-drive interposer board to the
system-board assembly.
10
Disconnect the hard-drive interposer board from the system-board assembly.
1
1
screws (2)
11
Remove the fan. See "Removing the Fan" on page 44.
12
Remove the heat sink. See "Removing the Heat Sink" on page 46.
2
2
1
2
system-board assembly
2
hard-drive interposer board
Removing the System Board
41
|

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: