Removing The Display Bracket - Dell Precision M4400 Service Manual

4. Tighten the M2 x 3-mm screw that secures the camera/microphone assembly to the display cover.
5. Replace the display bezel (see
6. Replace the display assembly (see
Removing the Latch Hook
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1. Follow the instructions in Before Working on Your
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the M2.5 x 5-mm screw.
5. Remove the latch hook from the display cover.
1 M2.5 x 5-mm screw (1) 2 latch hook
3 display cover
6. Replacing the Display Assembly).
Replacing the Latch Hook
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1. Follow the instructions in Before Working on Your
2. Position the latch hook on the display cover.
3. Replace the M2.5 x 5-mm screw.
4. Replace the display bezel (see
5. Replace the display assembly (see
Removing the Display Bracket
1. Remove the two M2 x 3mm screws from the display bracket.
Replacing the Display Bezel).
Replacing the Display Assembly).
Computer.
Removing the Display Assembly).
Removing the Display Bezel).
Computer.
Replacing the Display Bezel).
Replacing the Display Assembly).