Dell Precision M40 Service Manual page 12

Dell precision mobile workstation m40 service manual

Hide thumbs Also See for Precision M40:

System information manual (120 pages)

User manual (101 pages)

Table Of Contents

Table of Contents

1. Remove the

hinge

cover.

NOTICE:

Make sure you remove the flex cable before you remove the display assembly.

Flex Cable

2. Remove the 6-mm screw that secures the display flex cable to the strain relief, and then use the pull loop to remove the display flex cable from the

graphics card.

NOTICE:

When reconnecting the flex cable, press down on both ends of the connector, not in the middle. Pressing the middle of the connector can

damage fragile components.

3. Open the display and, from the back of the computer, remove the two screws labeled with a "circle D" that secure the display assembly to the bottom

case assembly.

4. With the display in an upright position, lift the display assembly from the bottom case assembly.

Display Assembly Bezel and Panel

Table of Contents