Intel Precision M2400 Administrator's Manual page 26

Intel AMT in DHCP Mode Settings Example
The table below shows a basic field settings example for the Intel AMT Configuration menu page to configure the computer
in DHCP mode.
Intel AMT Configurations Example in DHCP Mode
Intel AMT Configuration Parameters
Intel AMT Configuration
Host Name
TCP/IP
Provision Model
SOL/IDE-R
Remote FW Update
Save and exit MEBx and then boot the computer to the Windows® operating system.
Intel AMT in Static Mode Settings Example
Select and press <Enter>.
Example: IntelAMT
This is the same as the operating system machine name.
Set the parameters as follows:
Enable Network interface
Enable DHCP Mode
Set a domain name (e.g., amt.intel.com)
Intel AMT 4.0 Mode
Small Business
Enable SOL
Enable IDE-R
Enabled
Values